The fill 行為 for the element is 決定するd by the value of the ::XTiming::FillDefault せいにする.
This is the default value for the ::XTiming::Fill..
If the 使用／適用 of fillDefault to an element would result in the element having a value
of fill that is not 許すd on that element, the element will instead have a fill value of
AnimationFill::AUTO.
明示するs that the value of this せいにする (and of the fill 行為) are
相続するd from the ::XTiming::FillDefault value
of the parent element. If there is no parent element, the value is AnimationFill::AUTO.
This is the default value for the ::XTiming::FillDefault.
明示するs that the element will 延長する past the end of the last instance of the simple duration by "氷点の" the element 明言する／公表する at that point. The parent time コンテナ of the element 決定するs how long the element is frozen (as 述べるd すぐに below).
Setting this to "持つ／拘留する" has the same 影響 as setting to "凍結する", except that the element is always frozen to 延長する to the end of the simple duration of the parent time コンテナ of theelement (独立した・無所属 of the type of time コンテナ). For profiles that support a 層d layout model (e.g., SMIL 2.0 Language Profile), held elements (elements with fill="持つ／拘留する") will refresh their 陳列する，発揮する area when a 層 is 追加するd on 最高の，を越す then later 除去するd.
Setting this to "移行" has the same 影響 as setting to "凍結する", except that the element is 除去するd at the end of the 移行. This value is only 許すd on elements with マスコミ 直接／まっすぐに associated with them. If 明示するd on any other element (e.g. a time コンテナ element in the SMIL language profile), the せいにする is ignored. See the SMIL 移行s module.
The fill 行為 for the element is 決定するd by the value of the ::XTiming::FillDefault せいにする.
This is the default value for the ::XTiming::Fill..
If the 使用／適用 of fillDefault to an element would result in the element having a value
of fill that is not 許すd on that element, the element will instead have a fill value of
AnimationFill::AUTO.
明示するs that the value of this せいにする (and of the fill 行為) are
相続するd from the ::XTiming::FillDefault value
of the parent element. If there is no parent element, the value is AnimationFill::AUTO.
This is the default value for the ::XTiming::FillDefault.
明示するs that the element will 延長する past the end of the last instance of the simple duration by "氷点の" the element 明言する／公表する at that point. The parent time コンテナ of the element 決定するs how long the element is frozen (as 述べるd すぐに below).
Setting this to "持つ／拘留する" has the same 影響 as setting to "凍結する", except that the element is always frozen to 延長する to the end of the simple duration of the parent time コンテナ of theelement (独立した・無所属 of the type of time コンテナ). For profiles that support a 層d layout model (e.g., SMIL 2.0 Language Profile), held elements (elements with fill="持つ／拘留する") will refresh their 陳列する，発揮する area when a 層 is 追加するd on 最高の，を越す then later 除去するd.
Setting this to "移行" has the same 影響 as setting to "凍結する", except that the element is 除去するd at the end of the 移行. This value is only 許すd on elements with マスコミ 直接／まっすぐに associated with them. If 明示するd on any other element (e.g. a time コンテナ element in the SMIL language profile), the せいにする is ignored. See the SMIL 移行s module.
The fill 行為 for this element depends on whether the element 明示するs any of the せいにするs that define the simple or active duration:
If 非，不，無 of the せいにするs duration, end, repeatCount or repeatDuration are 明示するd on the element, then the element will have a fill 行為 同一の to that if it were 明示するd as AnimationFill::FREEZE.
さもなければ, the element will have a fill 行為 同一の to that if it were 明示するd as AnimationFill::REMOVE
