|
このページはEtoJ逐語翻訳フィルタによって翻訳生成されました。 |
Bookmark this on Delicious
Recommend to StumbleUpon
This page is browser friendly, by the way. Make your browser's window いっそう少なく wide than your whole 審査する and you will find the narrower columns much easier to read. For more tips, see my 力／強力にする Browsing hints.
I 堅固に recommend that you at least skim through the （警察などへの）密告，告訴（状） on my page about how the ArduServer2 code was developed, but if you want just "the answer", here it is. At least here is the Teensy half of things. You use an ordinary web browser, e.g. Firefox, for the （弁護士の）依頼人. You can 接近 an ArduServer over your LAN or across the internet.
I developed the に引き続いて in November 2014, on a Windows 7 machine, with the Arduino 環境 1.0.6, and Teenyduino (Teensy Loader) 1.20
You will have to change one line if you don't want to use port 80.
You will have to change the several lines with my URL (http://mon7nc...) if you want 接近 across the internet. (Change the URL from my URL to your URL.)
You'll need to alter the LAN 演説（する）／住所 line, if you 港／避難所't put your ArduServer on 192.168.0.240.
You may to change the line which 始める，決めるs the 装置's MAC. (You can use any number that isn't already used by something else on your LAN.)
If your LED is not on D5, and your phototransistor on A1, there will be other simple, 選び出す／独身-line changes to make.
I have a Windows program which can run in an internet connected computer anywhere in the world, and keep an 注目する，もくろむ on the 気温 where an ArduServer2 is. If the 気温 落ちるs below a level of your choosing, an alarm goes off.... the PC begins beeping. This is up and running, but not yet in a 見解／翻訳／版 for selling. If you want me to get the 商業の 見解／翻訳／版 開始する，打ち上げるd, 令状 and say so, I'll see if I can get to it! Somehting 類似の could be written for ArduServer3
Arduserver 3 support 回路・連盟s:
/* "ArduServer3" by TK Boyd
見解／翻訳／版? See "ver" constant
Help? See http://Arduserver.com */
//There is a LOT of Bad Code in this... but only in 尊敬（する）・点 of
// FWWBuf and 関係のある 事柄s. Not really 関連した to what I
// imagine brought you here: A デモ of the basis for Home Automation,
// remote sensing, etc. with Arudino/Teensy over the internet.
//(Code will work in Teensy EXACTLY like this, and not much changed
// in an Arduino.
//MOVE TAKE TTURE READINGS UP, を取り引きする putting READING, not marker "5.21" in FWW line
//For farwatchwathcer
/* This code this derives from is HEAVILY based on the example
"WebServer" 供給（する）d with (at least) the Arduino 環境 0022,
August 2011. Arduserver3 was an 進化 of Arduserver2, which is
where the "WebServer" example was first used as a basis.
Arduserver3 was developed Nov 14 with...
Arduino ソフトウェア 1.0.6
Windows 7
A Teensy 3.1, with a Wiznet820io module.
You DON'T, in the 環境 述べるd above, need the
w5100.cpp, w5100.h library とじ込み／提出するs you may come across
if you search the web.
--------------
Arduserver3: A 完全にする 声明 of What's Needed...
(at least I will TRY to make it 完全にする)
金物類／武器類 & ソフトウェア envirinment: See above, 加える...
会社にする／組み込むd in this code:
含む <SPI.h>, <Ethernet.h>: Using "just" the 基準
library modules 供給（する）d with the 1.0.6 Arduino
環境.... but be aware: They MAY be altered during
the 取り付け・設備 of Teensyduino. Which may be good for
the Teensy's needs, and either benign or helpful for
"real" Arduinos. I hope so, anyway! (The two 含むs
were part of Arduserver2, too, but I want to be （疑いを）晴らす
about What You Need.
Pins used....
By Wiz820io, as married to Teensy by 保護物，者 from www.pjrc.com/
(（米）棚上げする／（英）提議する copied from their 場所／位置. The SD card is not used in
Arduserver3, but its pins might just 同様に be avioded.
The MCP1825 is a voltage regulator on the 保護物，者.
Teensy3 SD Card WIZ820io MCP1825 JUMPER PADS
------- ------- -------- ------- -----------
4 2:CS
8 Left 味方する
9 RESET
10:CS SS
11:DOUT 3:DI MOSI
12:DIN 7:DO MISO
13:SCK 5:CLK SCLK
VIN 1:IN
4:VDD VIN33,VIN33 3:OUT
GND 6:VSS GND,GND,GND 2:GND+TAB 権利 味方する
PWDN 中心
ALSO from the pjrc.com 場所／位置...
"Some SD cards can be 極度の慎重さを要する to SPI activity while
the Ethernet library is initilized before the SD library.
"For best compatiblity with all SD cards, these 3 lines
are recommended at the beginning of 体制／機構().
Pins 4 and 10 will be reconfigured as 生産（高）s by
the SD and Ethernet libraries. Making them input
pullup 方式 before initialization 保証（人）s neither
装置 can 答える／応じる to unintentional signals while
the other is initialized."
((に引き続いて HAS BEEN 追加するd to Arduserver3)))
無効の 体制／機構() {
pinMode(4, INPUT_PULLUP);
pinMode(10, INPUT_PULLUP);
延期する(1); // 許す time for both pins to reach 3.3V
(End "also from pjrc.com 場所／位置")
Other pins used are as follows. The に引き続いて means that
the LED (which 使用者s of the server can turn on and off)
should be on pin 7, etc. These assignments can be changed,
if you'd rather things were どこかよそで.... just don't change
them TO a pin already in used by the Wiz820io (+SD card) 保護物，者
const byte bLEDpin=6;//The LED 使用者s of the web page can turn on and off
const byte bBeeperPin=7;//A 地元の "beeper" (self oscillating) to tell those
近づく the server that it has been 接近d
const byte bTturePin=5;//Pin used to connect a Dallas DS18B20 tture
sensor. This is optional, not "核心" to what Arduserver does.)
const byte bAnInWatchLEDPin=0;//For photosensor that 監視するs the LED
the 使用者 can turn on and off. Reading on this 確認するs for remote
使用者s that their 活動／戦闘s had the 願望（する）d 影響
const byte bAnInWatchAmbientLightPin=0;//Not 核心 to what Arduserver does.
=== Old documetation....
From the example "WebServer" 供給（する）d
with (at least) the Arduino 環境 0022,
August 2011.... BEGIN (edited) QUOTE...
A simple web server that shows the value of the analog input pins.
using... in Arduserve2 an Arduino W5100 Ethernet 保護物，者,
in Arduserver3 a Wiznet820io
回路・連盟: (ARDUSERVER2!... see other for Arduserver3)
* Ethernet 保護物，者 大（公）使館員d to pins 10, 11, 12, 13
* Analog inputs 大（公）使館員d to pins A0 through A5 (optional)
ADDED TO DEMO by TKB:
N.B.: May need changing from instance to instance...
IP 演説（する）／住所s... LAN and internet URL (latter appears several places)
Port
Pin assignments
... 追加するd to デモ continued...
A light sensor on (A0) looking at room's ambient light... not
central to 機能（する）／行事 of デモ, but needed, if text on served web
page to be valid
A light sensor on (A1), which an LED 向こうずねs on when it is 向こうずねing.
Probably best to 包む them together with opaque tape, sort
of a poor man's "opto-isolator"
An LED + resistor on pin 指定するd by value in bLEDpin
A beeper on pin 指定するd by bBeeperPin... not 必須の to デモ
(Bring pin high to turn either on... "beeper" makes continual
whine while on.)
Also 追加するd a Dallas 1-Wire 気温 sensing 半導体素子, DS18B20, on input 5.
The 内部の ID of YOUR 気温 sensing 半導体素子 will need entering
into the program if you want to use the same 施設, and the
1-Wire reading code in this is VERY 天然のまま.. you may want to 取って代わる
it. It will only read a DS18B20, for instance.
** N.B. ** The signal line needs to be pulled up to 5v. through a
4k7 reisitor when working with the Teensy, a 3v3 装置 internally,
with 5v tolerant inputs. I was using my DS18B20 *not* "parasitically
力／強力にするd", i.e. one pin to 5v, one pin to ground, the last pin Dallas
data pin. See http://sheepdogguides.com/dst9parasitic.htm for
more on the "parasitic 力／強力にする or not?" question, if you want it.
(End "ADDED"... 引用する continues...)
created 18 Dec 2009
by David A. Mellis
修正するd 4 Sep 2010
by Tom Igoe
... END QUOTE... and please remember, Mellis & Igoe's
code has been MESSED WITH.
Things that work: All credit to them.
Things that don't: Probably because TKB "broke" them!
面s of this are still a DOG'S DINNER... but it 作品!....
*/
#含む <SPI.h>
#含む <Ethernet.h>
//#含む <OneWire.h> will have to 変える code if this used.
//13 Nov 14: Was having no joy with old code, remmed out the 報告（する）／憶測
//半導体素子 fried?
const char ver[]="14 Nov 2014";//加える Wiznet to W5100
/*THE LETTER AT THE END OF THE DATE shows not,
which would be usual in my work, a later 見解／翻訳／版
of something done earlier on the same day.
Instead, there are four 見解／翻訳／版s of ArduServer2...
"a", "b", "c" and "d", identified by the last letter
of the 見解／翻訳／版 ID.
見解／翻訳／版 "21 Jan 12d" was best and (at this point) 最新の 見解／翻訳／版
of ArduServer2 when 開発 立ち往生させるd. Was "finished".
Old-at-11/14 公式文書，認める:
KEEP THE VERSION ID TO 10 characters:
The page served is nearly "too 十分な", and
the "ver" string is 挿入するd into the HTML.
HISTORY:
Changes from Arduserver2, ver "21 Jan 12d" to create
Arduserver3. (I will TRY to keep this 包括的な!)
Arduserver3 was built from Arduserver2, taking ver
"21 Jan 12d" of Arduserver2 from http://arduserver.com/a5as2code.htm
on 13 Nov 14.
There are "messy bits" left over from earlier 版s, but the idea
was to "証明する" that the Teensy + WIZ820io were 事実上
"減少（する） in 交替／補充s" for previous 金物類／武器類.
In Arduserver, Arduserver2, and Arduserver3, you may 井戸／弁護士席 have
to make changes to the constants 始める，決める up for ip[], mac[] and bPort
(These are 類似の to setting a static IP 演説（する）／住所 for any 装置
you may want to put on your LAN.)
Where Arduserver2, and the OLD "公式の／役人" server example had...
Server server(bPort); ... in the 1.0.6 "Server" example,
and for Arduserver3, we want...
EthernetServer server(bPort);
類似して...
（弁護士の）依頼人 （弁護士の）依頼人 = server.利用できる
became
EthernetClient （弁護士の）依頼人 = server.利用できる
Some changes were made which are not 文書d here, such as
changing the 肩書を与える of the page from "Arduserver 2" to
"Arduserver 3". These were just 詳細（に述べる）s of my use of what
the Teensy+Wiz820io made possible, and I thought them too
distracting.
I WILL について言及する re-enabling all the code relating to the
Revolver 地図／計画する. In my previous Arduserver, that had to be
sacrificed as I could not, in the previous 環境,
have such a large page.
Reading of 1-wire 半導体素子 ひどく re-written
*/
//Constants which 決定する what the Arduserver calls dark/薄暗い/井戸／弁護士席 lit
const int iLightLevelDark=4;//Below or equal to this: "Dark"
const int iLightLevelDim=15;//Above (or equal?) this: "井戸／弁護士席 lit"
//Between them: "Dimly lit"
const byte bLEDpin=6;
const byte bBeeperPin=7;
const byte bTturePin=5;
const byte bAnInWatchLEDPin=0;
const byte bAnInWatchAmbientLightPin=1;
const byte MaxArrayElement=252;
/*Defines the size of the array for 持つ／拘留するing the first
characters in each line coming in with the http requests
FOR SOME REASON, setting it to about 25 原因（となる）d bad problems...
I can't see why this happens. To be 調査／捜査するd!*/
/**********
YOU MAY HAVE TO CHANGE THE NUMBERS HERE.......
始める，決める up a port number, MAC 演説（する）／住所 and IP 演説（する）／住所 for your
監査役 below.
Port 80 is usual for HTTP. (I needed 81 for
special circumstances: two servers on one IP 演説（する）／住所)
The MAC 演説（する）／住所 will need changing if you have two 装置s on
your LAN with the same MAC 演説（する）／住所.
The IP 演説（する）／住所 may need changing, depending on your LAN, and
what is on it already. There must not be two 装置s with
the same IP 演説（する）／住所 on the same LAN.
While you would not want to change what is in mac[] or ip[]
while the program is running, you cannot make them constants,
or the call of Ethernet.begin(mac, ip); will not 収集する. */
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
byte ip[] = {192,168,0,240};//240 7NC... 株d with old, nuElec, 254 SX
const byte bPort = 81;
/* Initialize the Ethernet server library. At the
same time, tell it the port you want to use.*/
EthernetServer server(bPort);
/* 中止するd start of re-令状 of 1-wire code from example
OneWire ds(bTturePin);
byte addr[8];//fpr OneWire
byte data[12];//for OneWire
float celsius;//for OneWire
*/
char c,cMstRecentCmnd='/';
/*That '/' is part of one of the 天然のまま 面s of the 現在の code.
If someone 接近s the page without giving a 命令（する）, the "命令（する）"
the ソフトウェア sees is '/'... so '/' is 存在 used as an unreliable
rogue 説 "no 命令（する） given". However, if an 無効の 命令（する） is
given, anything can be 収穫d as "the 命令（する）". AND, if the 使用者
used...
(URL)/?cmd=/
... then a "valid" '/' would arrive as "the 命令（する）, but be ignored,
as it would be though to be 代表するing "no valic 命令（する）".
As I said... the server 作品, but it isn't very 強健な. It only
受託するs two 命令（する）s, and they have to be 現在のd 適切に.
They are, and are 現在のd, thus...
/?cmd=0
/?cmd=1
*/
char cLineBuffer[MaxArrayElement];
byte bPlaceInBuffer;
word wClicksProcessed=0;
//Next is a 全世界の which will be "messed with" in さまざまな
// places before 存在 used as an element in the text
// 生産（高） by Arduserver3. It is ONLY improtant if you are
// 利益／興味d in 監視するing Arduserver3 with FarWatchWathcer.
char FWWBuff[18]="1234S220055556666";//x bytes for chars, 加える 1 for null
//The に引き続いて is NOT important to the basic TCP/IP
// elements of this program. It is 単に something
// to make 容易にする the 気温 sensing/報告（する）／憶測ing
//My thanks to the authors of http://playground.arduino.cc/Code/Struct
// for helping me see how to use "Struct"
struct StructTture {
char cSign;//Will 持つ／拘留する '+' or '-'
word wCombined;//Will 持つ／拘留する 351 if tture was + OR - 3.51 deg Celcius
byte bWhole;//Will 持つ／拘留する 3, if tture was + or - 3.51
byte bFrac;//Will 持つ／拘留する 51 if tture was + or - 3.51
};
StructTture Tture;//始める，決める up a 全世界の structure for managing Tture readings
無効の ReadTtureSensor()
//In a perfect world, the 機能（する）／行事 would return
// a value of type StructTture... but that isn't
// 利用できる in Arduino (by any 平易な means), so
// we will fill the elements of a 全世界の StructTture-type
// variable, and thus still have SOME of the 利益s
// of Structured datatypes.
//The subroutine fills these, as follows, if sensir reads +3.51 deg C
// Tture.cSign='+';
// Tture.wCombined=351;
// Tture.bWhole=3;
// Tture.bFrac=51;
{
int HighByte, LowByte, TReading, SignBit, Tc_100, Whole, Fract;
OneWireReset(bTturePin);
OneWireOutByte(bTturePin, 0xcc);
OneWireOutByte(bTturePin, 0x44); // 成し遂げる 気温 転換, strong pullup for one sec
OneWireReset(bTturePin);
OneWireOutByte(bTturePin, 0xcc);
OneWireOutByte(bTturePin, 0xbe);
LowByte = OneWireInByte(bTturePin);
HighByte = OneWireInByte(bTturePin);
TReading = (HighByte << 8) + LowByte;
SignBit = TReading & 0x8000; // 実験（する） most sig bit
Tture.cSign='+';//provionally!
if (SignBit) // 消極的な
{
Tture.cSign='-';
TReading = (TReading ^ 0xffff) + 1; // 2's comp
}
Tc_100 = (6 * TReading) + TReading / 4; // multiply by (100 * 0.0625) or 6.25
Whole = Tc_100 / 100; // separate off the whole and わずかの 部分s
Tture.bWhole=Whole;//This and prev: 連合させる, 令状 out Whole?
Fract = Tc_100 % 100;//This and next: 連合させる, 令状 out Fract?
Tture.bFrac=Fract;
Tture.wCombined=(Tture.bWhole*100)+Tture.bFrac;
延期する(1200); // 延期する. For DS1820 at 十分な precision, at least 1000 needed
};//end of ReadTtureSensor()
無効の PutCharInFWWBuff(byte bWhere, char cTmp)
//A 機能（する）／行事 to change characters in the string FWWBuff, a 全世界の variable.
//N.B.: Spec bWhere as 0 to 取って代わる FIRST char in string.
//Problems will arise.. big problems... if "bad" bWhere passed to 決まりきった仕事
{
FWWBuff[bWhere]=cTmp;
};
char CharFrmNum(int iTmp, int bWhich)
//(There must be a better way... this only needed
// if you want the FWW lines.
// Part of turning a number to a string of char)
//For iTmp=1234 and bWhich=3, will return '2'
//Fails if iTmp 消極的な or >9999
// "/" is "DIV" 操作者.... 456 DIV 100 is 4
//Does 主要な 無s without extra hassle anywhere...
// (0 is returned for CharFrmNum(999,4))
{
int iTmp2,bTmp1,bTmp2;
char Digits[11]="0123456789";//Yes.. this should go どこかよそで,
// no need to "do" over and over.
if (bWhich==1){bTmp1=1;bTmp2=10;};
if (bWhich==2){bTmp1=10;bTmp2=100;};
if (bWhich==3){bTmp1=100;bTmp2=1000;};
if (bWhich==4){bTmp1=1000;bTmp2=10000;};
iTmp2=((iTmp % bTmp2)-(iTmp % bTmp1))/bTmp1;
return Digits[iTmp2];
};
無効の Stuff4InFWWBuff(byte bWhere,int iTmp)
//It should be possible to do this BETTER... but I cheated
// to Get It Done.
//変えるs iTmp to 4 characters, moves them to a place in
// the 全世界の variable FWWBuff
//Spec bWhere as 0 to put the 1st of the characters in the
// first character of FWWBuff
//決まりきった仕事 will be in trouble if iTmp >9999 or <0
//Problems will arise.. big problems... if "bad" bWhere passed to 決まりきった仕事
{
char sTmp[5];//Create array to 持つ／拘留する 4 chars+終結させるing null.
if (iTmp<1000) {sTmp[0]='0';} else {sTmp[0]=CharFrmNum(iTmp,4);};
if (iTmp<100) {sTmp[1]='0';} else {sTmp[1]=CharFrmNum(iTmp,3);};
if (iTmp<10) {sTmp[2]='0';} else {sTmp[2]=CharFrmNum(iTmp,2);};
if (iTmp<1) {sTmp[3]='0';} else {sTmp[3]=CharFrmNum(iTmp,1);};
PutCharInFWWBuff(bWhere,sTmp[0]);
PutCharInFWWBuff(bWhere+1,sTmp[1]);
PutCharInFWWBuff(bWhere+2,sTmp[2]);
PutCharInFWWBuff(bWhere+3,sTmp[3]);
};
無効の 体制／機構()
{
//A few things to make pjrc.com 保護物，者's SD card (if used in
// 拡張 of Arduserver3... irrelevant to IT) behave...
pinMode(4, INPUT_PULLUP);
pinMode(10, INPUT_PULLUP);
延期する(1); // 許す time for both pins to reach 3.3V
// start the Ethernet 関係 and the server:
Ethernet.begin(mac, ip);
server.begin();
//Serial.begin(9600);//回復する, if you want to 監視する program's
//操作／手術 経由で serial 監視する
pinMode(bBeeperPin,OUTPUT);
digitalWrite(bBeeperPin,LOW);
pinMode(bLEDpin,OUTPUT);
LEDOff();
//For tture sensing... (2 lines
digitalWrite(bTturePin, LOW);
pinMode(bTturePin, INPUT);
}
無効の 宙返り飛行()
{ int iAn0,iAn1;//Type word might have been better. NOTE: "An0" does not
//やむを得ず 反映する a reading from the 装置's analog CHANNEL 0.
//Gather readings, before starting the TCP/IP stuff...
iAn0=analogRead(bAnInWatchAmbientLightPin);//We will use iAn0 TWICE, later.
iAn1=analogRead(bAnInWatchLEDPin);//We will use iAn0 TWICE, later.
ReadTtureSensor();//Fills the fields of the 全世界の "Tture"
EthernetClient （弁護士の）依頼人 = server.利用できる();//1.... these rems, with numbers, 残余s from
//開発 of the program, 保持するd in 事例／患者 they help 述べる the
//final 見解／翻訳／版. Which lines have them is a quirk of 運命／宿命.
if (（弁護士の）依頼人) {//2
boolean currentLineIsBlank = true;//3
bPlaceInBuffer=0;
char cCmnd='H';//Rogue for "no 命令（する）"
//In 現在の CRUDE 計画／陰謀, after URL, either nothing
//... in which 事例／患者 an 'H' is seen (H of HTTP is 選ぶd up)
//or a question 示す (to be 伝統的な) followed by
// /?cmd=
//followed by one 事例／患者 極度の慎重さを要する, program hardcoded character.
//See subroutine DoCmnd for what the 命令（する）s are, what they do.
cMstRecentCmnd='H';//Init with rogue
while (（弁護士の）依頼人.connected()) {//4
if (（弁護士の）依頼人.利用できる()) {//5
c = （弁護士の）依頼人.read();//6
if ((c!='\n') && (c!='\r')){
cLineBuffer[bPlaceInBuffer]=c;
if (bPlaceInBuffer<MaxArrayElement) {bPlaceInBuffer++;};
}
//Serial.print(c);
if (c == '\n' && currentLineIsBlank) {//7
延期する(250);//Give light sensor a moment to 登録（する） changed light level...
//LDR 返答 不振の.. but even phototransistor needs a little time
//During "DoCmnd" an LED may have been turned on or off/
//Can be much shorter with better sensor.
wClicksProcessed++;//A frill
ShortBeep();//A frill
//現在の code (ver 6 Sept 11c: 2 sensors, 2 buttons, RevolverMap)
//VERY CLOSE to too much code.... 追加する more, and watch closely for
//bad and 貧しく 報告（する）／憶測d misbehaviour.
（弁護士の）依頼人.println("HTTP/1.1 200 承認する");//8
（弁護士の）依頼人.println("Content-Type: text/html");//9
（弁護士の）依頼人.println();//10
/*The HTML created by this program is far from
"井戸／弁護士席 （手先の）技術d". But it does the 職業... */
（弁護士の）依頼人.println("<html>");
（弁護士の）依頼人.println("<長，率いる>");
（弁護士の）依頼人.print("<肩書を与える>ArduServ3</肩書を与える>");
（弁護士の）依頼人.println("</長，率いる>");
（弁護士の）依頼人.println("</長，率いる>");
（弁護士の）依頼人.println();
（弁護士の）依頼人.println("<団体／死体>");
//Now we will 挿入する four "comment" lines in the page of
// HTML to be served up.
//They are for the use of FarWatchWatcher (FWW), a Windows app which
// checks web servers periodically, watching for "bad" 条件s,
// and raising an alarm, if bad 条件s seen. There is a webpage
// about FarWatchWatcher, 特記する／引用するd in the first line...
//There is a その上の comment at the end of this 封鎖する of code.
//If you are not 利益／興味d in FarWatchWatcher, you can ignore this
// 封鎖する, it 単に, as I said, 追加するs three lines of comments to
// the page served up.
（弁護士の）依頼人.println("<!--NeXtLiNe4FWWdf001. (http://sheepdogsoftware.co.uk/ssdd67.htm)-->");
//"NeXtLiNe4FWW is a rogue, a "指紋", for finding by FarWatchWathcer
// the df001 示すs that the data line (which comes next) will use
// a particular data syntax: 4 fields, 4/5/4/4 characters each.
//記録，記録的な／記録する 判型: ccccSttddxxxxyyyy
//As part of the df001 鮮明度／定義, we その上の 約束 that only
// the fifth character will be anything but a digit. (5th char: + or -
// first field: count of "clicks seen", or some other "count"
// which should change endlessly, to help FWW （悪事，秘密などを）発見する a
// 立ち往生させるd server which is producing a page, but a static page.
// second field: tture in Celcius:調印する, 2 digits integer part,
// 2 digits fraction. So, -5.3 degrees: "-0530"
// third field: four digits. In the 事例／患者 of Aruduserver3, the
// reading from one of the analog channels
// fourth field: four digits. In the 事例／患者 of Aruduserver3, the
// reading from the other 監視するd analog channel.
（弁護士の）依頼人.print("<!--");
//Fill FWWBuff with string to be 追加するd to page in a moment...
//Overwrite the first 4 chars of FWWBuff with the
//digits of the click count...
Stuff4InFWWBuff(0,wClicksProcessed);
//Put the 調印する character in...
PutCharInFWWBuff(4,Tture.cSign);
//Four chars for tture (ww/dd, so for 3.5 deg: 0350)
Stuff4InFWWBuff(5,Tture.wCombined);
//Four chars for reading from first analog input
Stuff4InFWWBuff(9,iAn0);
//Four chars for reading from other analog input
Stuff4InFWWBuff(13,iAn1);
//And now, at last.........
（弁護士の）依頼人.print(FWWBuff);
//... and finish off the comment the FWW "message" goes on.
（弁護士の）依頼人.println("-->");
（弁護士の）依頼人.print("<!--In line before this: 'NeXtLiNe4FWW' rogue/記念品,");
（弁護士の）依頼人.println("'df001' 示唆するs 'type 001' Data 判型, 残り／休憩（する） is 解放する／自由な text.-->");
（弁護士の）依頼人.print("<!--Under df001: ccccSTTttxxxxyyyy: click count; ");
（弁護士の）依頼人.println("Tture 調印する,whole,frac; analog reading; another.-->mi");
//End of 封鎖する of code 挿入するing four comment lines
//for FarWatchWatcher
（弁護士の）依頼人.println("<中心>");
（弁護士の）依頼人.print("<h2>ArduServer 3, ver ");
（弁護士の）依頼人.print(ver);
（弁護士の）依頼人.println("</h2>");
（弁護士の）依頼人.print("<h3>See <a href=\"http://ArduServer.com\"<"
"的=\"_blank\">ArduServer.com</a></h3>");
（弁護士の）依頼人.print("<h3>金物類／武器類: Teensy 3.1 / Wiz820io Ethernet Module</h3>");
（弁護士の）依頼人.println("</中心>");
（弁護士の）依頼人.println();
if ((cMstRecentCmnd=='0')||(cMstRecentCmnd=='1')){
（弁護士の）依頼人.print("<p>Cmd received: <b>");
（弁護士の）依頼人.print(cMstRecentCmnd);
（弁護士の）依頼人.println("</b></p>");
}//no ;
else {
（弁護士の）依頼人.print("<p>Cmnds: \?cmd=0 and \?cmd=1<br>");
（弁護士の）依頼人.print("追加する \"/?cmd=1\" to page URL for different "
"text here.</p>");
};
（弁護士の）依頼人.println("<p>- -");
（弁護士の）依頼人.print("<br>気温, degrees C: <b>");
//Here begins small 封鎖する to 挿入する tture reading, taken earlier
if (Tture.cSign=='-') // If its 消極的な
{
（弁護士の）依頼人.print("-");
}
（弁護士の）依頼人.print(Tture.bWhole);
（弁護士の）依頼人.print(".");
if (Tture.bFrac < 10)
{
（弁護士の）依頼人.print("0");
}
（弁護士の）依頼人.print(Tture.bFrac);
（弁護士の）依頼人.print("\n");
//Here ends 封鎖する 挿入するing tture reading)
（弁護士の）依頼人.println("</b>");
（弁護士の）依頼人.println("<p>- -");
（弁護士の）依頼人.print("<br>Analog input ");
（弁護士の）依頼人.print(bAnInWatchAmbientLightPin);
（弁護士の）依頼人.print(" reads: <b>");
（弁護士の）依頼人.print(iAn0);
（弁護士の）依頼人.println("</b>");
（弁護士の）依頼人.print("<br>Connected to a "
"<a href=\"http://www.arunet.co.uk/tkboyd/ec/ec1senslight.htm\" "
"的=\"_blank\">"
"phototransistor</a>.</p>");//12
if (iAn0<=iLightLevelDark)
{（弁護士の）依頼人.println("<p>Room is <b>dark.</b></p>");}
else
{if (iAn0<=iLightLevelDim)
{（弁護士の）依頼人.println("<p>Room is <b>dimly lit</b>.</p>");}
else
{（弁護士の）依頼人.println("<p>Room is <b>井戸／弁護士席 lit</b>.</p>");
};
};
（弁護士の）依頼人.println("<p>- -");//12
（弁護士の）依頼人.print("<br>Analog input ");
（弁護士の）依頼人.print(bAnInWatchLEDPin);
（弁護士の）依頼人.print(", senses LED, reads: <b>");//12
（弁護士の）依頼人.print(iAn1);//13
（弁護士の）依頼人.println("</b>");
/* Here's a 天然のまま, but more （疑いを）晴らす, 代案／選択肢 to the buttons... just use links...
（弁護士の）依頼人.println("</p><p>Click here to turn LED on <a href=\"http://mon7nc.dyndns.org:81/?cmd=0\">"
"http://mon7nc.dyndns.org:81/?cmd=0</a><br>");
（弁護士の）依頼人.println("Click here to turn LED off <a href=\"http://mon7nc.dyndns.org:81/?cmd=1\">"
"http://mon7nc.dyndns.org:81/?cmd=1</a></p>");
*/
/*The に引き続いて is just(?) a "prettier" way to 達成する what the
links above 達成する. You can probably do more with forms than
you can do with mere links... but we're not going far with the
modest form code below.... */
（弁護士の）依頼人.println();
（弁護士の）依頼人.println("<form METHOD=get 活動／戦闘=\"http://mon7nc.dyndns.org:81/\">");
（弁護士の）依頼人.println("<input type=hidden 指名する=\"cmd\" value=\"1\">");
（弁護士の）依頼人.println("<input type=服従させる／提出する value=\"LED On\">");
（弁護士の）依頼人.println("</form>");
（弁護士の）依頼人.println();
（弁護士の）依頼人.println("<form METHOD=get 活動／戦闘=\"http://mon7nc.dyndns.org:81/\">");
（弁護士の）依頼人.println("<input type=hidden 指名する=\"cmd\" value=\"0\">");
（弁護士の）依頼人.println("<input type=服従させる／提出する value=\"LED Off\">");
（弁護士の）依頼人.println("</form>");
（弁護士の）依頼人.println();
/* （弁護士の）依頼人.println("<p>Light sensor watching LED, a mere LDR, 答える／応じるs "
"slowly... click 'on' (or 'off') several times to "
"get \"final answer\".</p>");
*/
（弁護士の）依頼人.print("<p>Clicks since server booted: ");
（弁護士の）依頼人.print(wClicksProcessed);
（弁護士の）依頼人.println("</p>");
（弁護士の）依頼人.println("<br>");
//TKB: New RevolverMap for ArduServer2... mon277..:81...
//Done 3 Aug 11, 22:25, my third... just after 審理，公聴会 from Kate (on NOLS course) of Xelda's death...
//First 麻薬中毒の up Uno and "公式の／役人" Ethernet 保護物，者 earlier same evening.
（弁護士の）依頼人.println("<中心>");
/*PLEASE NOTE: This code 明確な／細部 for my page. You need to go to RevolverMaps and get
your own 解放する／自由な code, if you want a 類似の thing on your own page. 平易な!*/
（弁護士の）依頼人.print("<script type=\"text/javascript\" src=\"http://jf.revolvermaps.com/r.js\">");
（弁護士の）依頼人.print("</script><script type=\"text/javascript\">rm_f1st('2','260','true','誤った','000000','5sgqledqgna',");
（弁護士の）依頼人.print("'true','00ff6c');</script><noscript><applet codebase=\"http://rf.revolvermaps.com/j ");
（弁護士の）依頼人.print("code=\"核心.RE\" width=\"260\" 高さ=\"260\" 古記録=\"g.jar\"><param 指名する=\"cabbase\" ");
（弁護士の）依頼人.print("value=\"g.cab\" /><param 指名する=\"r\" value=\"true\" /><param 指名する=\"n\" value=\"誤った\" /");
（弁護士の）依頼人.print("><param 指名する=\"i\" value=\"5sgqledqgna\" /><param 指名する=\"m\" value=\"2\" />");
（弁護士の）依頼人.print("<param 指名する=\"s\" value=\"260\" /><param 指名する=\"c\" value=\"00ff6c\" /><param 指名する=\"v\" ");
（弁護士の）依頼人.print("value=\"true\" /><param 指名する=\"b\" value=\"000000\" /><param 指名する=\"rfc\" value=\"true\" />");
（弁護士の）依頼人.println("</applet></noscript>");
（弁護士の）依頼人.println("</中心>");
（弁護士の）依頼人.println("</団体／死体>");
（弁護士の）依頼人.println("</html>");
break;//15
}
if (c == '\n') {//17
currentLineIsBlank = true;//18
//陳列する，発揮する with 衝撃を和らげるもの contents;
if (bPlaceInBuffer>0){
for (byte c1=0; c1<bPlaceInBuffer; c1++){
//Serial.print(cLineBuffer[c1]);
}
//Serial.println();
if ((cLineBuffer[0]=='G')&&(cLineBuffer[1]=='E')&&(cLineBuffer[2]=='T'))
/*VERY CRUDE: Always just 選ぶs up 11th char of GET line... either the H of...
GET / HTTP... or the character after the tradtional "?cmd=", as in...
GET /?cmd=1 HTTP... */
{
cCmnd=cLineBuffer[10];//Yes: INDEX 10 for 11th character.
//Serial.print("命令（する） was: ");
//Serial.println(cCmnd);
if (cCmnd!='/') {DoCmnd(cCmnd);};
/*Don't do if cCmnd=='/'... that 示唆するs there
was no 命令（する）, or a "?cmd=/" 命令（する）, which
should not be 追加するd to the 範囲 of valid 命令（する）s
if the code is 改訂するd.*/
}
}
//end "を取り引きする 衝撃を和らげるもの contents"
bPlaceInBuffer=0;//始める，決める 支援する to 0 for next line
} //19... things like the "19" are 残余s of an earlier line ID
// system
else if (c != '\r') { //20
currentLineIsBlank = 誤った;//21
}//22
}//23
}//24
延期する(1);//25
（弁護士の）依頼人.stop();//26
}//27
}//28
無効の DoCmnd(char cLCmnd)
{
if (cLCmnd=='0'){
//Serial.println("Cmnd was a 無!");
cMstRecentCmnd=cLCmnd;
LEDOff();
};
if (cLCmnd=='1'){
//Serial.println("Cmnd was a one!");
cMstRecentCmnd=cLCmnd;
LEDOn();
};
}
無効の LEDOn(){
digitalWrite(bLEDpin,HIGH);
}
無効の LEDOff(){
digitalWrite(bLEDpin,LOW);
}
無効の ShortBeep(){
digitalWrite(bBeeperPin,HIGH);
延期する(80);
digitalWrite(bBeeperPin,LOW);
}
//New in ver 1 jan 12d from here to "end new..."
// This is not only new stuff.
無効の OneWireReset(int Pin) // reset. Should 改善する to 行為／法令／行動する as a presence pulse
{
digitalWrite(Pin, LOW);
pinMode(Pin, OUTPUT); // bring low for 500 us
delayMicroseconds(500);
pinMode(Pin, INPUT);
delayMicroseconds(500);
}//end of OneWireReset
無効の OneWireOutByte(int Pin, byte d) // 生産（高） byte d (least sig bit first).
{
byte n;
for(n=8; n!=0; n--)
{
if ((d & 0x01) == 1) // 実験（する） least sig bit
{
digitalWrite(Pin, LOW);
pinMode(Pin, OUTPUT);
delayMicroseconds(5);
pinMode(Pin, INPUT);
delayMicroseconds(60);
}
else
{
digitalWrite(Pin, LOW);
pinMode(Pin, OUTPUT);
delayMicroseconds(60);
pinMode(Pin, INPUT);
}
d=d>>1; // now the next bit is in the least sig bit position.
}
}//end of OneWireOutByte
byte OneWireInByte(int Pin) // read byte, least sig byte first
{
byte d, n, b;
for (n=0; n<8; n++)
{
digitalWrite(Pin, LOW);
pinMode(Pin, OUTPUT);
delayMicroseconds(5);
pinMode(Pin, INPUT);
delayMicroseconds(5);
b = digitalRead(Pin);
delayMicroseconds(50);
d = (d >> 1) | (b<<7); // 転換 d to 権利 and 挿入する b in most sig bit position
}
return(d);
}//end OneWireInByte
//end 封鎖する of new in ver 1 jan 12d stuff
//END OF IT ALL!
Remember: The code is explained for you at my page explaining the ArduServer2's 創造.
And there's a separate page with help on the support 金物類／武器類, 含むing a PCB design for a suitable 保護物，者.)
Page 実験（する）d for 同意／服従 with INDUSTRY (not MS-only) 基準s, using the 解放する／自由な, 公然と accessible validator at validator.w3.org
CSS behind the page checked, at least once upon a time!, with http://jigsaw.w3.org/css-validator/
Why does this page 原因（となる） a script to run? Because of the Google パネル盤s, and the code for the search button. Also, I have some of my pages' traffic 監視するd for me by eXTReMe tracker. They 申し込む／申し出 a 解放する／自由な tracker. If you want to try one, check out their 場所／位置. Why do I について言及する the script? Be sure you know all you need to about spyware.
....... P a g e . . . E n d s .....